Description
HP EliteDesk 800 G2 SFF
Graphics card
hp elitedesk 800 g2 sff datasheet
Intel HP graphics (integrated)
|
Specification
|
Description
|
||||||||||||||||||||||||||||||||||||||||||
|
VGA controller
|
Integrated
|
||||||||||||||||||||||||||||||||||||||||||
|
DisplayPort
|
Multimode capable; supports HDCP, Display Port Audio (2 streams), HBR2 link rates and Multi-Stream Technology for a maximum of 3 displays (including the integrated panel)
|
||||||||||||||||||||||||||||||||||||||||||
|
Bus type
|
N/A
|
||||||||||||||||||||||||||||||||||||||||||
|
RAMDAC
|
N/A
|
||||||||||||||||||||||||||||||||||||||||||
|
Memory
|
Intel graphics do not have dedicated memory but utilizes some of the computer’s system memory The amount of memory used for graphics depending on the amount of system memory installed, BIOS settings, operating system, and system load. 32 MB is pre-allocated for graphics use at system boot time. Additional memory can be allocated at boot time by the BIOS for PAVP (Protected Audio Video Playback) support for playback of protected video content.
Additional memory is allocated for graphics as needed using Intel’s Dynamic Video Memory Technology (DVMT), to provide an optimal balance between graphics and system memory use.
|
||||||||||||||||||||||||||||||||||||||||||
|
Maximum graphics memory
|
Windows 7: Up to 1.7 GB
Windows 8.1: Up to 1.8 GB
|
||||||||||||||||||||||||||||||||||||||||||
|
Maximum color depth
|
32 bits/pixel
|
||||||||||||||||||||||||||||||||||||||||||
|
Graphics/video API support
|
6th generation core processors:
The Processor Graphics contains a refresh of the seventh generation graphics core enabling substantial gains in performance and lower power consumption. Up to 16 EU support.
Next Generation Intel Clear Video Technology HD Support is a collection of video playback and enhancement features that improve the end user’s viewing experience.
DirectX Video Acceleration (DXVA) support for accelerating video processing
Advanced Scheduler 2.0, 1.0
Windows 7, Windows 8, Linux OS Support
DirectX 11.1
Open GL 4.3
Open CL 1.2
|
||||||||||||||||||||||||||||||||||||||||||
|
Supported display resolutions and refresh rates
|
|
AMD Radeon R9 350 1 GB PCIe x16
|
Specification
|
Description
|
|
Memory
|
2 GB 128-bit wide frame buffer operating at 1150 MHz
|
|
Controller clock speed
|
AMD Radeon R9 350 GPU operating at 925 MHz
|
|
Multidisplay support
|
A maximum of 4 displays are supported by the card. A maximum of 2 legacy displays (Native VGA, DVI, or displays connected with passive DisplayPort adapters are considered as legacy)
|
|
Graphics/API support
|
DIRECTX 11.1, Open GL 4.3, Open CL1.2, UVD 3
|
|
Output connectors
|
1 x Dual-Link DVI-I, 2x DisplayPort; Includes DVI to VGA adapter
|
NVIDIA GeForce GT 730 2 GB PCIe x8 graphics card
|
Specification
|
Description
|
|
Introduction
|
Get impressive graphics and high resolution dual-display performance in a low profile, PCI Express x8 graphics add-in card based on the NVIDIA Kepler Graphics Processor. Improve your everyday PC, Web conferencing, and video or photo editing.
|
|
Memory
|
2 GB DDR3 64-bit wide frame buffer operating at 900 MHz
|
|
Controller clock speed
|
NVIDIA Kepler GPU operating at 902 MHz
|
|
Multi-display support
|
A maximum of 4 displays are supported by the card
|
|
Graphics/API support
|
Supports Microsoft DirectX 12, OpenGL 4.4 and OpenCL 2 APIs, Shade Model 5, UVD 4.2, VCE 2.0, and DirectCompute 11
|
|
Output connectors
|
1 x Dual-Link DVI-I, 1x DisplayPort; Includes DVI to VGA adapter Display Port output is multi-mode capable, support Audio, HBR2 and MST
|
NVIDIA GeForce GTX 960 2 GB PCIe x16 graphics card
|
Specification
|
Description
|
|
Controller/clock speed
|
NVIDIA GeForce GTX960 GPU operating at up to 1178 MHz
|
|
Memory
|
2GB 128-bit wide frame buffer operating at up to 3505 MHz
|
|
Multidisplay support
|
A maximum of 4 displays are supported by the card
|
|
System interface
|
PCI Express x16 Gen3
|
|
Graphics/API support
|
DirectX 12, OpenGL 4.4
|
|
Output connectors
|
3 x display port
1 x HDMI
1 x dual link DVI-I
|
|
Power requirements
|
120 W max
Requires 2×3 pin power cable & 400W system power supply
|
|
Mechanical
|
175 mm x 112 mm (6.9 x 4.4 in) full height double width slot
|
Hard disk and solid state storage
120 GB SATA 2.5 in Opal2 SED Solid State Drive (Pro 2500)
|
Specification
|
Description
|
|
Unformatted capacity
|
120 GB
|
|
Architecture
|
Multi-level cell (MLC) NAND
|
|
Interface
|
Serial ATA 3.0 (6.0 Gb/s)
|
|
Form factor
|
2.5 in
|
|
Height
|
Low profile, 7 mm height
|
|
Width
|
69.85 mm ± 0.25
|
|
Length
|
100.45 mm
|
|
Weight
|
78 g
|
|
Bandwidth performance
|
Sustained sequential read: up to 540 MB/s
Sustained sequential write: up to 480 MB/s
|
|
Power consumption
|
Average read: < 3.7 W
Write: 3.7 W
Standby: < 55 mW
|
|
Environmental (non-condensing)
|
Operating temperature: 0° to 70° C (32° to 158° F)
Relative humidity: 5% – 95%
Shock: 1,500 G/0.5 ms
|
120 GB SATA 2.5 in Opal2 SED Solid State Drive (Pro 2500)
|
Specification
|
Description
|
|
Unformatted capacity
|
120 GB
234,441,648 (Total Logical Sectors)
|
|
Architecture
|
ATA 8 Compliant and SATA 3.0 compliant
Supports Mode 2 Multiword DMA
Supports Drive Failure Prediction
Supports SMART Offline Read Scan
Supports Mode 4 PIO
Supports Mode 5 UDMA
Supports HP Drive Protection System
ATA 8 ACS-2 Data / TRIM Support
Support DEVSLP feature
Supports TRIM Command per ATA8 / ACS 2
Supports FIPS-197 features
Support TCG Storage Architecture Core Specification 2.0
|
|
Interface
|
Serial ATA 3.0 (6.0 Gb/s)
|
|
Form factor
|
2.5 in
|
|
Height
|
Low profile, 7 mm height
|
|
Width
|
69.85 mm ± 0.25
|
|
Length
|
100.45 mm
|
|
Weight
|
78 g
|
|
Bandwidth performance
|
Sustained sequential read: up to 540 MB/s
Sustained sequential write: up to 480 MB/s
|
|
Power consumption
|
Average read: < 3.7 W
Write: 3.7 W
Standby: < 55 mW
|
|
Environmental (non-condensing)
|
Operating temperature: 0° to 70° C (32° to 158° F)
Relative humidity: 5% – 95%
Shock: 1,500 G/0.5 ms
|
128 GB SATA 2.5 in 3D non-SED Solid State Drive
|
Specification
|
Description
|
|
Unformatted capacity
|
128 GB
250,069,680 (user addressable sectors)
|
|
Architecture
|
Self-Encrypting (SED) Solid State Drive with NAND Flash and SATA interface
Fully complies with ATA/ATAPI-7 Standard (Partially Complies with ATA/ATAPI-8)
Power Saving Modes: DIPM (Partial / Slumber mode)
Support NCQ : Up to 32 depth
Synchronous Signal Recovery
|
|
Interface
|
Serial ATA (6.0 Gb/s)
|
|
Form factor
|
2.5 in
|
|
Dimensions (W x H x L)
|
69.85 x 6.8 x 100.45 mm (2.75 x 0.26 x 3.95 in)
|
|
Weight
|
Up to 54 g
|
|
Bandwidth performance
|
Sustained sequential read: up to 530 MB/s
Sustained sequential write: up to 140 MB/s
|
|
Power consumption
|
Active: 250 mW
Idle: 50 mW
|
|
Mean time between failure
|
1,500,000 hours
|
|
Environmental
|
Operating temperature: 32° to 158° F (0° to 70° C)
Relative humidity: 5% – 95%
Shock: 1,500 G/0.5 ms
|
128 GB SATA 2.5 in Opal2 SED Solid State Drive
|
Specification
|
Description
|
|
Unformatted capacity
|
128 GB
250,069,680 (user addressable sectors)
|
|
Architecture
|
Self-Encrypting (SED) Solid State Drive with NAND Flash and SATA interface
Trusted Computing Group(TCG) OPAL compliant encrypted solid state drive
|
|
Interface
|
Serial ATA (6.0 Gb/s)
|
|
Form factor
|
2.5 in
|
|
Height
|
6.8 mm ± 0.2
|
|
Width
|
69.85 mm ± 0.25
|
|
Length
|
100.2 mm ± 0.25
|
|
Weight
|
73 g
|
|
Bandwidth performance
|
Sustained sequential read: up to 520 MB/s
Sustained sequential write: up to 340 MB/s
|
|
Power consumption
|
Average read: < 250 mW
Idle: 50 mW
|
|
Mean time between failures
|
1,500,000 hours
|
|
Environmental (non-condensing)
|
Operating temperature: 0° to 70° C (32° to 158° F)
Relative humidity: 5% – 95%
Shock: 1,500 G/0.5 ms
|
HP 128 GB SATA 2.5 in (non-SED) Solid State Drive
|
Specification
|
Description
|
|
Unformatted capacity
|
128 GB
|
|
Architecture
|
Multi level cell (MLC) NAND
|
|
Interface
|
SATA 6 Gb/s
|
|
Dimensions (W x H x D)
|
6.985 x 0.7 x 10.05 cm (2.75 x 0.276 x 3.96 in)
|
|
Weight
|
73 g
|
|
Bandwidth performance
|
Sustained sequential read: up to 450 MB/s
Sustained sequential write: up to 260 MB/s
Random read: up to 46k IOPs
Random write: up to 56k IOPs
|
|
Latency
|
Read: 55 ms
Write: 55 ms
|
|
DC power requirement
|
4.5 V – 5.5 V
|
|
Total power consumption
|
Active: 160 mW
Idle: < 85 mW
|
|
Useful drive life
|
1.2 million device hours
|
|
Environmental (non-condensing)
|
Operating temperature: 0° to 70° C (32° to 158° F)
Relative humidity: 5% – 95%
Shock: 1,500 G/1.0 msec
|
|
Regulations
|
UL, CSA, EN 60950-2000, CISPR Pub 22 Class B, CNS 13438, AS/NZS CISPR 22:2002 Class B, Korea KCC, CE Mark
|
Intel Pro 2500 180 GB Solid State Drive
|
Specification
|
Description
|
|
Unformatted capacity
|
180 GB
|
|
Architecture
|
Multi level cell (MLC) NAND
|
|
Interface
|
SATA 3.0 (6 Gb/s)
|
|
Dimensions (W x H x D)
|
6.985 x 0.7 x 10.05 cm (2.75 x 0.276 x 3.96 in)
|
|
Weight
|
78 g
|
|
Bandwidth performance
|
Sustained sequential read: up to 540 MB/s
Sustained sequential write: up to 490 MB/s
Random read: 41k IOPs
Random write: 80k IOPs
|
|
Latency
|
Read: 80 us
Write: 85 us
|
|
DC power requirement
|
5 VDC 5% – 100 mV ripple p-p
|
|
Total power consumption
|
Active: 195 mW
Idle: < 85 mW
|
|
Useful drive life
|
72 TB written, up to 40 GB/day for 5 years
|
|
Environmental (non-condensing)
|
Operating temperature: 0° to 70° C (32° to 158° F)
Relative humidity: 5% – 95%
|
180 GB SATA Opal2 SED SSD (Intel Pro 2500)
|
Specification
|
Description
|
|
Formatted capacity
|
180 GB
|
|
Architecture
|
Solid State Drive with SATA interface; ATA 8 Compliant and SATA 3.0 compliant
|
|
Interface
|
SATA 3.0 (6 Gb/s)
|
|
Form factor
|
2.5 in
|
|
Dimensions (W x H x L)
|
69.85 x 7 mm x 100.45 mm (2.75 x 0.27 x 3.95 in)
|
|
Weight
|
78 g
|
|
Data transfer rate
|
Sustained sequential read: up to 540 MB/s
Sustained sequential write: up to 490 MB/s
|
|
Power consumption
|
Power-up: 6 W
Read: < 3.7 W
Write: 3.7 W
Standby: <55 mW
DEVSLP: < 7 mW
|
|
Environmental (non-condensing)
|
Operating temperature: 0° to 70° C (32° to 158° F)
Relative humidity: 5% – 95%
Shock: 1500 G
|
HP 1 TB 7.2K rpm SATA 6.0Gb/s 2.5 in Hard Disk Drive
|
Specification
|
Description
|
|
Formatted capacity
|
1 TB
|
|
Rotational speed
|
7200 rpm
|
|
Interface
|
Serial 6 Gb/s
|
|
Buffer size
|
32 MB
|
|
Logical blocks
|
1,953,525,168
|
|
Seek time
|
Single track: 2 ms
Average: 11 ms
Full-stroke: 25 ms
|
|
Dimensions (W x H)
|
70 x 9.5 mm (2.75 x 0.37 in)
|
|
Operating temperature
|
5° to 55° C (41° to 131° F)
|
HP 1 TB SATA 6G 3.5 in 8 GB Solid State Hybrid Drive (SSHD)
|
Specification
|
Description
|
|
Formatted capacity
|
1 TB
|
|
Spindle speed
|
7,200 rpm
|
|
Drive type
|
Solid State Hybrid Drive (SSHD) technology with NAND Flash
|
|
Interface
|
SATA
|
|
Cache buffer
|
64 MB
|
|
NAND Flash Commercial Multilevel Cell (cMLC)
|
8 GB
|
|
Number of sectors
|
1,953,525,168
|
|
Seek time
|
Single track: 2 ms
Average: 11 ms
|
|
Dimensions (W x H x L)
|
102 x 20.1 x 147 mm (4 x 0.78 x 5.79 in)
|
|
Weight
|
400 g (0.88 lb)
|
|
Operating temperature
|
5° to 55° C (41° to 131° F)
|
HP 1 TB 7.2K rpm SATA 6.0 Gb/s 3.5 in Hard Disk Drive
|
Specification
|
Description
|
|
Formatted capacity
|
1 TB
|
|
Rotational speed
|
7,200 rpm
|
|
Interface
|
SATA 6.0 Gb/s
|
|
Buffer size
|
16 MB
|
|
Logical blocks
|
1,953,525,168
|
|
Seek time
|
Single track: 2 ms
Average: 11 ms
Full stroke: 21 ms
|
|
Dimensions (W x H)
|
102 x 25.4 mm (4 x 1 in)
|
|
Operating temperature
|
5° to 55° C (41° to 131° F)
|
HP 1 TB SATA 6G 2.5 in 8 GB Solid State Hybrid Drive (SSHD)
|
Specification
|
Description
|
|
Formatted capacity
|
1 TB
|
|
Spindle speed
|
5,400 rpm
|
|
Interface
|
SATA 6.0 Gb/s
|
|
Cache buffer
|
64 MB
|
|
NAND flash commercial multilevel cell (cMLC)
|
8 GB
|
|
Number of sectors
|
976,773,168
|
|
Seek time
|
Single track: 2 ms
Average: 12 ms
|
|
Dimensions (W x H x L)
|
69.85 x 9.5 x 100.35mm (2.75 x 0.37 x 3.95 in)
|
|
Weight
|
115 g (0.25 lb)
|
|
Operating temperature
|
0° to 60° C (32° to 140° F)
|
256 GB SATA 2.5 in 3D Non-SED Solid State Drive
|
Specification
|
Description
|
|
Unformatted capacity
|
256 GB
500,118,192 (User Addressable Sectors)
|
|
Architecture
|
Self-Encrypting (SED) Solid State Drive with NAND Flash and SATA interface.
Fully complies with ATA/ATAPI-7 Standard (Partially Complies with ATA/ATAPI-8)
Power Saving Modes: DIPM (Partial / Slumber mode)
Support NCQ: Up to 32 depth
Synchronous Signal Recovery
|
|
Interface
|
SATA 6 GB/s
|
|
Dimensions (W x H x L)
|
69.85 x 6.8 x 100.2 mm (2.75 x 0.26 x 3.94 in)
|
|
Weight
|
54 g
|
|
Bandwidth performance
|
Sustained sequential read: 540 MB/s
Sustained sequential write: 280 MB/s
|
|
Power consumption
|
Active: 250 mW
Idle: 50 mW
|
|
Mean time between failure
|
1,500,000 hours
|
|
Environmental (non-condensing)
|
Operating temperature: 0° to 70° C (32° to 158° F)
Relative humidity: 5% – 95%
Shock: 1,500 G/0.5 ms
|
HP 256 GB SATA 2.5 in Self-Encrypting (SED) Opal 2 Solid State Drive
|
Specification
|
Description
|
|
Unformatted capacity
|
256 GB
|
|
Architecture
|
Self-Encrypting (SED) Solid State Drive with 25 nm MLC NAND Flash and SATA interface
|
|
Interface
|
SATA 2 (3 GB/s)
|
|
NAND flash
|
25 nm MLC NAND flash
|
|
Dimensions (W x H x L)
|
69.85 x 7 x 100.5 mm (2.75 x 0.27 x 3.95 in)
|
|
Weight
|
73 g (0.16 lb)
|
|
Bandwidth performance
|
Sustained sequential 128k read: 450 MB/s
Sustained sequential 128k write: 260 MB/s
Random 4k read: 46k IOPs
Random 4k write: 56k IOPs
|
|
Latency
|
Read: 55
Write: 55
|
|
Power consumption
|
Active: 160 mW
Idle: < 85 mW
|
|
Useful drive life
|
72 TB written, up to 40GB/day for 5 years
|
|
Environmental
|
Operating temperature: 32° to 158° F (0° to 70° C)
Relative humidity: 5% – 95%
Shock: 1,500 G/1 ms
|
HP 256 GB SATA 6Gb/s SSD
|
Specification
|
Description
|
|
Capacity
|
256 GB
|
|
Interface
|
SATA 6 GB/s
|
|
Synchronous transfer rate
|
Sustained read: 560 MB/s
Sustained write: 510 MB/s
Random read: 100k IOPs
Random write: 88k IOPs
|
|
Power consumption
|
Active: 150 mW
Idle: 70 mW
|
|
Operating temperature
|
0° to 70° C (32° to 158° F)
|
HP 2 TB 7.2K rpm SATA 6.0Gb/s 3.5 in Hard Disk Drive
|
Specification
|
Description
|
|
Formatted capacity
|
2 TB
|
|
Rotational speed
|
7,200 rpm
|
|
Interface
|
SATA 6 GB/s NCQ
|
|
Cache (multisegmented)
|
64 MB
|
|
Seek time
|
Read: < 8.5 ms
Write: < 9.5 ms
|
|
Dimensions (W x H x L)
|
101.6 x 26.11 x 146.99 mm (4 x 1.02 x 5.78 in)
|
|
Weight
|
626 g (1.38 lb)
|
|
Operating temperature
|
0° to 60° C (32° to 140° F)
|
500 GB 2.5 in FIPS 140-2 SED Solid State Drive
|
Specification
|
Description
|
|
Formatted capacity
|
500 GB
|
|
Architecture
|
Self-Encrypting (SED) Solid State Drive with SATA interface
|
|
Interface
|
SATA 6 GB/s
|
|
Form factor
|
2.5 in
|
|
Dimensions (W x H x L)
|
69.85 x 6.8 x 100.35 mm (2.75 x 0.26 x 3.95 in)
|
|
Weight
|
< 95 g (0.2 lb)
|
|
Bandwidth performance
|
Sustained data transfer rate OD: 100 MB/s
I/O data transfer rate: 600 MB/s
|
|
Power
|
Spinup: 1 A
Idle: 0.7 W
Sleep: 0.18 W
|
|
Environmental (non-condensing)
|
Operating temperature: 5° to 55° C (41° to 131° F)
Relative humidity: 5% to 95%
Shock: 400 G/2 ms
|
HP 500 GB 7.2K SATA 6.0Gb/s 2.5 in Hard Disk Drive
|
Specification
|
Description
|
|
Capacity
|
500 GB
|
|
Rotational speed
|
7,200 rpm
|
|
Interface
|
SATA 6 GB/s
|
|
Buffer size
|
16 MB
|
|
Logical blocks
|
976,773,168
|
|
Seek time
|
Single track: 2 ms
Average: 12 ms
Full-stroke: 25 ms
|
|
Dimensions (W x H)
|
70 x 6.8 mm (2.75 x 0.26 in)
|
|
Environmental (non-condensing)
|
Operating temperature: 5° to 55° C (41° to 131° F)
|
HP 500 GB 7.2K SATA 6.0Gb/s 2.5 in Opal2 Hard Disk Drive
|
Specification
|
Description
|
|
Capacity
|
500 GB
|
|
Rotational speed
|
7,200 rpm
|
|
Interface
|
SATA 6 GB/s
|
|
Buffer size
|
32 MB
|
|
Logical blocks
|
976,773,168
|
|
Seek time
|
Single track: 1.5 ms
Average: 12 ms
Full-stroke: 25 ms
|
|
Dimensions (W x H)
|
70 x 6.8 mm (2.75 x 0.26 in)
|
|
Environmental (non-condensing)
|
Operating temperature: 5° to 55° C (41° to 131° F)
|
500 GB 7.2K rpm SATA 6.0Gb/s 3.5 in Hard Disk Drive
|
Specification
|
Description
|
|
Formatted capacity
|
500 GB
|
|
Spindle speed500
|
7,200 rpm
|
|
Interface
|
SATA 3.0 (6 GB/s)
|
|
Buffer size
|
16 MB
|
|
Logical blocks
|
976,773,168
|
|
Seek time
|
Single track: 2 ms
Average: 11 ms
Full-stroke: 21 ms
|
|
Dimensions (W x H)
|
101.6 x 25.4 mm (4 x 1 in)
|
|
Environmental (non-condensing)
|
Operating temperature: 5° to 55° C (41° to 131° F)
|
HP 500 GB SATA 6G 2.5 in 8 GB Solid State Hybrid Drive (SSHD)
|
Specification
|
Description
|
|
Formatted capacity
|
500 GB
|
|
Spindle speed
|
5,400 rpm
|
|
Drive type
|
Solid State Hybrid Drive (SSHD) technology with NAND Flash
|
|
Interface
|
SATA 6 GB/s
|
|
Cache buffer
|
64 MB
|
|
NAND Flash Commercial Multilevel Cell (cMLC)
|
8 GB
|
|
Number of sectors
|
976,773,168
|
|
Seek time
|
Single track: 2 ms
Average: 12 ms
|
|
Dimensions (W x H x L)
|
69.85 x 6.8 x 100.35 mm (2.75 x 0.26 x 3.95 in)
|
|
Weight
|
95 g (0.2 lb)
|
|
Environmental (non-condensing)
|
Operating temperature: 5° to 55° C (41° to 131° F)
|
HP 128 GB Turbo Drive SSD-M.2 PCIe Card
|
Specification
|
Description
|
|
Unformatted capacity
|
128 GB
|
|
Interface
|
|
|
Architecture
|
Solid State Drive M.2 PCIe Gen 2 x4 AHCI; NCQ Command Set
|
|
Form factor
|
M.2 2280
|
|
Dimensions (W x H x L)
|
22 x 80 x 3.73 mm (0.89 x 3.14 x 0.14 in)
|
|
Weight
|
8 g (0.01 lb)
|
|
Bandwidth performance
|
Sustained sequential read: 920 MB/s
Sustained sequential write: 430 MB/s
Random read: 8500 IOPs
Random write: 32000 IOPs
|
|
Power
|
Allowable voltage: 3.3V ± 5%
|
|
Total power consumption
|
Active: 5.8 W
Idle: 80 mW
|
|
Mean time before failure
|
1.5 M hours
|
|
Environmental (non-condensing)
|
Operating temperature: 0° to 70° C (32° to 158° F)
Relative humidity: 5% – 95%
Shock: 1500 G
|
|
Regulations
|
Safety TUV UL CB c-UL-us
EMC/EMI
|
HP 256 GB Turbo Drive SSD-M.2 PCIe Card
|
Specification
|
Description
|
|
Unformatted capacity
|
256 GB
|
|
Architecture
|
Solid State Drive M.2 PCIe Gen 2 x4 AHCI; NCQ Command Set
|
|
Interface
|
M.2 PCIe Gen 2 x4
|
|
Form factor
|
M.2 2280
|
|
Dimensions (W x H x L)
|
0.8 x 7 x 50 mm (0.03 x 0.27 x 1.96 in)
|
|
Weight
|
10 g
|
|
Data transfer rate
|
Sequential read: 2150 MB/s
Sequential write: 1200 MB/s
|
|
Power
|
Power-up: N/A
Read: 4 W
Write: 5.1 W
Standby: 700 mW
Idle: 70 mW
|
|
Environmental (non-condensing)
|
Operating temperature: 0° to 70° C (32° to 158° F)
Relative humidity: 5% – 95%
Shock: 1000 G peak (operating)
|
HP 512 GB turbo drive G2 SSD-M.2 PCIe Card
|
Specification
|
Description
|
|
Formatted capacity
|
512 GB
|
|
Architecture
|
Solid State Drive M.2 PCIe Gen 3 x4 NVMe
NVMe 1.1a Compliant
|
|
Interface
|
M.2 PCIe Gen 3 x4 NVMe
|
|
Form factor
|
M.2 2280 DS
|
|
Dimensions (W x H x L)
|
0.8 x 7 x 50 mm (0.03 x 0.27 x 1.96 in)
|
|
Weight
|
10 g
|
|
Data transfer rate
|
Sequential read: 2150 MB/s
Sequential write: 1200 MB/s
|
|
Power
|
Power-up: N/A
Read: 4 W
Write: 5.1 W
Standby: 700 mW
Idle: 70 mW
|
|
Environmental (non-condensing)
|
Operating temperature: 0° to 70° C (32° to 158° F)
Relative humidity: 5% – 95%
Shock: 1000 G peak (operating)
|
Optical drives
HP Slim SuperMulti DVD Writer Drive
|
Specification
|
Description
|
|
Height
|
12.7 mm (0.5 in)
|
|
Orientation
|
Either horizontal or vertical
|
|
Interface type
|
SATA/ATAPI
|
|
Disc recording capacity
|
Up to 8.5 GB DL or 4.7 GB standard
|
|
Dimensions (W x H x L)
|
128 x 12.7 x 127 mm (5.04 x 0.5 x 5 in) without bezel
|
|
Weight
|
190 g (0.42 lb)
|
|
Write speeds
|
DVD-RAM: Up to 5x
DVD-R DL: Up to 6x
DVD+R: Up to 8x
DVD+RW: Up to 8x
DVD+R DL: Up to 6x
DVD-R: Up to 8x
DVD-RW: Up to 6x
CD-R: Up to 24x
CD-RW: Up to 24x
|
|
Read speeds
|
DVD-RAM: Up to 5x
DVD-RW, DVD+RW: Up to 8x
DVD-R DL, DVD+R DL: Up to 8x
DVD+R, DVD-R: Up to 8x
DVD-ROM DL, DVD-ROM: Up to 8x
CD-ROM, CD-R: Up to 24x
CD-RW: Up to 24x
|
|
Access time (typical)
|
Random: DVD-ROM and CD-ROM 170 ms
Full stroke: DVD-ROM and CD-ROM 320 ms
Stop time: 6 seconds
|
|
Power
|
Source: Slimline SATA DC power receptacle
DC power requirement: 5 VDC ± 5%-100 mV ripple p-p
DC current: 5 VDC (< 1000 mA typical, 1600 mA maximum)
|
|
Environmental (non-condensing)
|
Temperature: 5° to 50° C (41° to 122° F)
Relative humidity: 10% – 80%
Maximum wet bulb temperature: 29° C (84° F)
|
HP Slim Blu-ray BDXL Drive
|
Specification
|
Description
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
Height
|
12.7 mm (0.5 in)
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
Orientation
|
Either horizontal or vertical
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
Interface type
|
SATA/ATAPI
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
Disc recording capacity
|
Up to 128 GB QL, 100 GB TL, 50 GB DL or 25 GB standard SL
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
Dimensions (W x H x L)
|
128 x 12.7 x 127 mm (5.04 x 0.5 x 5 in) without bezel
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
Weight
|
170 g (0.37 lb)
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
Write speeds
|
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
Read speeds
|
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
Access time (typical)
|
Random
BD-ROM: 350 ms
DVD-ROM: 185 ms
CD-ROM: 165 ms
Full stroke
BD-ROM: 350 ms
DVD-ROM: 345 ms
CD-ROM: 340 ms
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
Power
|
Source: Slimline SATA DC power receptacle
DC power requirement: 5 VDC ± 5%-100 mV ripple p-p
DC current: 5 VDC -1200 mA typical, 2000 mA maximum
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
Environmental (non-condensing)
|
Temperature: 5° to 50° C (41° to 122° F)
Relative humidity: 10% – 80%
Maximum wet bulb temperature: 29° C (84° F)
|
HP Slim DVD-ROM Drive
|
Specification
|
Description
|
|
Height
|
12.7 mm (0.5 in)
|
|
Orientation
|
Either horizontal or vertical
|
|
Interface type
|
SATA/ATAPI
|
|
Dimensions (W x H x L)
|
128 x 12.7 x 127 mm (5.04 x 0.5 x 5 in) without bezel
|
|
Weight
|
170 g (0.37 lb)
|
|
Read speeds
|
DVD+R/-R/+RW/ -RW/+R DL /-R DL: Up to 8x
DVD-ROM: Up to 8x
CD-ROM,CD-R: Up to 24x
CD-RW: Up to 24x
|
|
Access time (typical)
|
Random
DVD-ROM: 170 ms
CD-ROM: 170 ms
Full stroke
DVD-ROM: 320 ms
CD-ROM: 320 ms
|
|
Power
|
Source: Slimline SATA DC power receptacle
DC power requirement: 5 VDC ± 5%-100 mV ripple p-p
DC current: 5 VDC – < 1000 mA typical, < 1600 mA maximum
|
|
Environmental (non-condensing)
|
Temperature: 5° to 50° C (41° to 122° F)
Relative humidity: 10% – 80%
Maximum wet bulb temperature: 29° C (84° F)
|
Network and communications
Intel I219LM gigabit network connection LOM (standard) for hp elitedesk 800 g2 sff
|
Specification
|
Description
|
|
Connector
|
RJ-45
|
|
System interface
|
PCIe + SMBus
|
|
Controller
|
Intel I219LM gigabit Ethernet controller
|
|
Data rates supported
|
Supports operation at 10/100/1000 Mb/s data rates
|
|
IEEE compliance
|
IEEE 802.3 Ethernet interface for 1000BASE-T, 100BASETX, and 10BASET applications (802.3ab, 802.3u, and 802.3i, respectively)
IEEE 802.3az support [Low Power Idle (LPI) mode]
IEEE 802.3u auto-negotiation conformance
|
|
Performance
|
Jumbo Frames (up to 9 kB)
802.1Q & 802.1p
Receive Side Scaling (RSS)
Two Queues (Tx & Rx)
|
|
Power
|
Ultra low power at cable disconnect
Reduced power consumption during normal operation and power down modes
Integrated Intel auto connect battery saver (ACBS)
Single-pin LAN disable for easier BIO implementation
Fully integrated switching voltage regulator (iSVR)
Lower power link-up (LPLU)
|
|
MAC/PHY interconnect
|
PCIe-based interface for active state operations (SO state)
SMBus-based interface for host and management traffic (Sx low power state)
|
|
Management interface
|
MDC/MDIO management interface
|
|
Security and manageability
|
Intel vPro support with appropriate Intel chipset components
|
Intel Ethernet I210-T1 gigabit network adapter
|
Specification
|
Description
|
|
Connector
|
RJ-45
|
|
System interface
|
PCI express x1
|
|
Controller
|
Intel I210 gigabit Ethernet controller
|
|
Memory
|
Integrated Dual 48K configurable transmit receive FIFO Buffers
|
|
Data rates supported
|
10/100/1000 Mbps
|
|
IEEE compliance
|
802.1P
802.1Q
802.2
802.3
802.3AB
802.3u
802.3x flow control
|
|
Bus architecture
|
PCI-E 2.1
|
|
Data path width
|
X1, 250 MB/s, Bi-directional interface
|
|
Data transfer mode
|
Bus-master DMA
|
|
Hardware certifications
|
FCC, B, CE, TUV-c, TUVus Mark Canada and United States, TUV-GS Mark for European Union
|
|
Power requirement
|
Aux 3.3 V, 3.0 Watts in 1000 base-T and 1.0 Watts in 100 Base-T
|
|
Boot ROM support
|
Yes
10BASE-T (half-duplex) 10 Mbps
10BASE-T (full-duplex) 20 Mbps
|
|
Network transfer rate
|
10BASE-T (half-duplex) 10 Mbps
10BASE-T (full-duplex) 20 Mbps
100BASE-TX (half-duplex) 100 Mbps
100BASE-TX (full-duplex) 200 Mbps
1000BASE-T (full-duplex) 2000 Mbps (actual rate limited by PCI bus)
|
|
Environmental
|
Operating temperature: 0° to 55° C (32° to 132° F)
Operating humidity: 85% at 55° C (131° F)
|
|
Management
|
WOL, PXE, DMI, WFM 2.0
|
Broadcom BCM943228Z 802.11n 2×2 DualBand combo PCIe x1 card
|
Specification
|
Description
|
|
Wireless LAN standard
|
IEEE 802.11a
IEEE 802.11b
IEEE 802.11g
IEEE 802.11n
|
|
Interoperability
|
Wi-Fi certified
|
|
Frequency band
|
802.11b/g/n
802.11a/n
|
|
Antenna structure
|
2 transmit
2 receive
|
|
Data rates
|
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b: 1, 2, 5.5, 11 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: MCS 0 ~ MCS 15, (20MHz, and 40MHz)
|
|
Modulation
|
Direct Sequence Spread Spectrum
CCK, BPSK, QPSK, 16-QAM, 64-QAM
|
|
Security
|
IEEE and Wi-Fi compliant 64 / 128 bit WEP encryption for a/b/g mode only
AES-CCMP: 128 bit in hardware
802.1x authentication
WPA, WPA2: 802.1x. WPA-PSK, WPA2-PSK, TKIP, and AES
WPA2 certification
IEEE 802.11i
Cisco Certified Extensions, all versions through CCX4 and CCX Lite
WAPI
|
|
Sub-channels
|
Multinational support with frequency bands and channels compliant to local regulations
|
|
Network architecture models
|
Ad-hoc (Peer to Peer)
Infrastructure (Access Point Required)
|
|
Roaming
|
IEEE 802.11 compliant roaming between band Access Points
|
|
Output power
|
802.11b: +16 dBm minimum
802.11g: +14 dBm minimum
802.11a: +14 dBm minimum
802.11n HT20 (2.4 GHz): +13 dBm minimum
802.11n HT40 (2.4 GHz): +13 dBm minimum
802.11n HT20 (5 GHz): +12 dBm minimum
802.11n HT40 (5 GHz): +12 dBm minimum
|
|
Power consumption
|
Transmit: 2.0 W (max)
Receive: 1.6 W (max)
Idle mode (PSP): 180 mW (WLAN Associated)
Idle mode: 60 mW (WLAN unassociated)
Radio disabled: 30 mW
|
|
Power management
|
ACPI and PCI Express compliant power management 802.11 compliant power saving mode
|
|
Receiver sensitivity
|
802.11b, 1Mbps: -94 dBm maximum
802.11b, 11Mbps: -86 dBm maximum
802.11g, 6Mbps: -88 dBm maximum
802.11g, 54Mbps: -74 dBm maximum
802.11a, 6Mbps: -86 dBm maximum
802.11a, 54Mbps: -72 dBm maximum
802.11n, MCS07: -69 dBm maximum
802.11n, MCS15: -66 dBm maximum
|
|
Antenna type
|
High efficiency antenna with spatial diversity, mounted in the display enclosure
Two embedded dual band 2.4/5 GHz antennas are provided to the card to support WLAN MIMO and Bluetooth communications
|
|
Form factor
|
PCI-Express M.2 MiniCard
|
|
Dimensions
|
Type 2230: 2.3 x 22 x 30 mm
Type 1630: 2.3 x 16 x 30 mm
|
|
Weight
|
Type 2230: 2.8 g
Type 1630: 2 g
|
|
Operating voltage
|
3.3v +/- 9%
|
|
Temperature
|
Operating: -10° to 70° C (14° to 158° F)
Non-operating: -40° to 80° C (-40° to 176° F)
|
|
Humidity
|
Operating: 10% to 90% (non-condensing)
Non-operating: 5% to 95% (non-condensing)
|
|
Altitude
|
Operating: 0 to 3,048 m (10,000 ft)
Non-operating: 0 to 15,240 m (50,000 ft)
|
|
LED activity
|
LED Amber – Radio OFF; LED White – Radio ON
|
HP integrated module with Bluetooth 4.0+EDR wireless technology
|
Specification
|
Description
|
||||||||||||
|
Bluetooth specification
|
4.0+EDR compliant
|
||||||||||||
|
Frequency band
|
2402 to 2480 MHz
|
||||||||||||
|
Number of available channels
|
79 (1 MHz) available channels
|
||||||||||||
|
Data rates and throughput
|
3 Mbps data rate; throughput up to 2.17 Mbps
Synchronous Connection Oriented links up to 3, 64 kbps, voice channels
Asynchronous Connection Less links 2178.1 kbps/177.1 kbps asymmetric or 1306.9 kbps symmetric
|
||||||||||||
|
Transmit power
|
The Bluetooth component shall operate as a Class II Bluetooth device with a maximum transmit power of +4 dBm for BR and EDR
|
||||||||||||
|
Receiver sensitivity
|
|
||||||||||||
|
Power consumption
|
Peak (Tx) 330 mW
Peak (Rx) 230 mW
Selective Suspend 17 mW
|
||||||||||||
|
Range
|
Up to 10 m (33 ft)
|
||||||||||||
|
Electrical interface
|
USB 2.0 compliant
|
||||||||||||
|
Bluetooth software supported link topology
|
Microsoft Windows Bluetooth Software
|
||||||||||||
|
Electrical interface Bluetooth software supported security
|
Point to Point, multipoint pico nets up to 7 slaves
Full support of Bluetooth security provisions
|
||||||||||||
|
Power management
|
Microsoft Windows ACPI, and USB Bus Support
Self-configurable to optimize power conservation in all operating modes, including Standby, Hold, Park, and Sniff
|
||||||||||||
|
Security
|
All necessary regulatory approvals for supported countries, including FCC (47 CFR) Part 15C, Section 15.247 & 15.249
|
||||||||||||
|
Power management certifications
|
ETS 300 328, ETS 300 826
Low Voltage Directive IEC950
UL, CSA, and CE Mark
|
||||||||||||
|
Bluetooth profiles supported
|
Serial Port Profile (SPP)
Service Discovery Application Profile (SDAP)
Dial-Up Networking (DUN)
Generic Object Exchange Profile (GOEP)
Object Push Profile (OPP)
File Transfer Profile (FTP)
Synchronization Profile (SYNC)
Hard Copy Cable Replacement (HCRP)
Personal Area Networking Profile (PAN)
Human Interface Device Profile (HID)
FAX Profile (FAX)
Basic Imaging Profile (BIP)
Headset Profile (HSP)
Hands Free Profile (HFP)
Advanced Audio Distribution Profile (A2DP)
|
Intel 7265 802.11ac 2×2 DualBand combo PCIe x1 card for hp elitedesk 800 g2 sff
|
Specification
|
Description
|
|
Wireless LAN standards
|
IEEE 802.11a
IEEE 802.11b
IEEE 802.11g
IEEE 802.11n
IEEE 802.11ac
|
|
Interoperability
|
Wi-Fi certified
|
|
Frequency band
|
802.11b/g/n
802.11a/n
|
|
Data rates
|
802.11b: 1, 2, 5.5, 11 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: MCS 0 ~ MCS 15, (20MHz, and 40MHz)
802.11ac : MCS0 ~ MCS9, (1SS, and 2SS) (20MHz, 40MHz, and 80MHz)
|
|
Modulation
|
Direct Sequence Spread Spectrum
BPSK, QPSK, CCK, 16-QAM, 64-QAM, 256-QAM
|
|
Security
|
IEEE and Wi-Fi compliant 64 / 128 bit WEP encryption for a/b/g mode only
AES-CCMP: 128 bit in hardware
802.1x authentication
WPA, WPA2: 802.1x. WPA-PSK, WPA2-PSK, TKIP, and AES
WPA2 certification
IEEE 802.11i
Cisco Certified Extensions, all versions through CCX4 and CCX Lite
WAPI
|
|
Network architecture models
|
Ad-hoc (peer to peer)
Infrastructure (access point required)
|
|
Roaming
|
IEEE 802.11 compliant roaming between access points
|
|
Output power
|
802.11b : +16 dBm minimum
802.11g : +14 dBm minimum
802.11a : +14 dBm minimum
802.11n HT20 (2.4 GHz) : +13 dBm minimum
802.11n HT40 (2.4 GHz) : +13 dBm minimum
802.11n HT20 (5 GHz) : +12 dBm minimum
802.11n HT40 (5 GHz) : +12 dBm minimum
802.11ac 80 MHz (5 GHz) : +11 dBm minimum
|
|
Power consumption
|
Transmit: 2.0 W (max)
Receive: 1.6 W (max)
Idle mode (PSP): 180 mW (WLAN associated)
Idle mode: 60 mW (WLAN unassociated)
Radio disabled: 30 mW
|
|
Power management
|
ACPI and PCI Express compliant power management
802.11 compliant power saving mode
|
|
Receiver sensitivity
|
802.11b, 1Mbps: -94 dBm maximum
802.11b, 11Mbps: -86 dBm maximum
802.11g, 6Mbps: -88 dBm maximum
802.11g, 54Mbps: -74 dBm maximum
802.11a, 6Mbps: -86 dBm maximum
802.11a, 54Mbps: -72 dBm maximum
802.11n, MCS07: -69 dBm maximum
802.11n, MCS15: -66 dBm maximum
802.11ac, 1SS, MCS-0: -86 dBm maximum
802.11ac, 1SS, MCS-9: -61 dBm maximum
802.11ac, 2SS, MCS-0: -83 dBm maximum
802.11ac, 2SS, MCS-9: -58 dBm maximum
|
|
Antenna type
|
High efficiency antenna with spatial diversity, mounted in the display enclosure
Two embedded dual band 2.4/5 GHz antennas are provided to the card to support WLAN MIMO communications and Bluetooth communications
|
|
Form factor
|
PCI-Express M.2 MiniCard
|
|
Dimensions
|
Type 2230: 2.3 x 22 x 30 mm
Type 1630: 2.3 x 16 x 30 mm
|
|
Weight
|
Type 2230: 2.8 g
Type 1630: 2 g
|
|
Operating voltage
|
3.3v +/- 9%
|
|
Temperature
|
Operating: –10° to 70° C (14° to 158° F)
Non-operating: –40° to 80° C (–40° to 176° F)
|
|
Humidity
|
Operating: 10% to 90% (non-condensing)
Non-operating: 5% to 95% (non-condensing)
|
|
Altitude
|
Operating: 0 to 3,048 m (10,000 ft)
Non-operating: 0 to 15,240 m (50,000 ft)
|
|
LED activity
|
LED Amber – Radio OFF; LED White – Radio ON
|
HP integrated module with Bluetooth 4.0+EDR wireless technology for hp elitedesk 800 g2 sff
|
Specification
|
Description
|
||||||||||||
|
Bluetooth specification
|
4.0+EDR compliant
|
||||||||||||
|
Frequency band
|
2402 – 2480 MHz
|
||||||||||||
|
Number of available channels
|
79 (1 MHz) available channels
|
||||||||||||
|
Data rates and throughput
|
3 Mbps data rate; throughput up to 2.17 Mbps
Synchronous Connection Oriented links up to 3, 64 kbps, voice channels
Asynchronous Connection Less links 2178.1 kbps/177.1 kbps asymmetric or 1306.9 kbps symmetric
|
||||||||||||
|
Transmit power
|
The Bluetooth component shall operate as a Class II Bluetooth device with a maximum transmit power of +4 dBm for BR and EDR
|
||||||||||||
|
Receiver sensitivity
|
|
||||||||||||
|
Power consumption
|
Peak (Tx) 330 mW
Peak (Rx) 230 mW
Selective Suspend 17 mW
|
||||||||||||
|
Range
|
Up to 10 m (33 ft)
|
||||||||||||
|
Electrical interface
|
USB 2.0 compliant
|
||||||||||||
|
Bluetooth software supported link topology
|
Microsoft Windows Bluetooth software
|
||||||||||||
|
Electrical interface Bluetooth software supported security
|
Point to Point, Multipoint Pico Nets up to 7 slaves
Full support of Bluetooth Security Provisions
|
||||||||||||
|
Power management certifications
|
Microsoft Windows ACPI, and USB Bus Support
Self-configurable to optimize power conservation in all operating modes, including Standby, Hold, Park, and Sniff
|
||||||||||||
|
Bluetooth profiles supported
|
FCC (47 CFR) Part 15C, Section 15.247 and 15.249
UL, CSA, and CE Mark
Serial Port Profile (SPP)
Service Discovery Application Profile (SDAP)
Dial-Up Networking (DUN)
Generic Object Exchange Profile (GOEP)
Object Push Profile (OPP)
File Transfer Profile (FTP)
Synchronization Profile (SYNC)
Hard Copy Cable Replacement (HCRP)
Personal Area Networking Profile (PAN)
Human Interface Device Profile (HID)
FAX Profile (FAX)
Basic Imaging Profile (BIP)
Headset Profile (HSP)
Hands Free Profile (HFP)
Advanced Audio Distribution Profile (A2DP)
|
Intel 8260 2×2 dual band 802.11ac WLAN/Bluetooth combo
|
Specification
|
Description
|
|
Wireless LAN standards
|
IEEE 802.11 ac/a/b/g/n
|
|
Interoperability
|
Wi-Fi certification
WLAN + Bluetooth Combo M.2 Card device shall meet all of the requirements to support Bluetooth 4.1 and backwards compatible with 2.1 with EDR
|
|
Frequency band
|
802.11b/g/n
802.11a/n/ac
|
|
Antenna interface
|
With antennas installed in the system, the antenna peak gain is less than +3dBi in the 2.4 GHz band and less than +4dBi in the 5 GHz band to allow the device to meet regulatory limits
|
|
Transmit power
|
The Bluetooth component shall operate as a Class II Bluetooth device with a maximum transmit power of +4 dBm for BR and EDR
|
|
Data rates
|
802.11b: 1, 2, 5.5, 11 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: card will support rates for NSS=1 and NSS=2 for RX and TX for 20 and 40 MHz channels
802.11ac: card will support rates for NSS=1 and NSS=2 for RX and TX for 80 MHz channels. 433Mbps for 1×1 and 867Mbps for 2×2
|
|
Security
|
IEEE and Wi-Fi compliant 64 / 128 bit WEP encryption for a/b/g mode only
AES-CCMP: 128 bit in hardware
802.1x authentication
WPA, WPA2: 802.1x. WPA-PSK, WPA2-PSK, TKIP, and AES
WPA2 certification
IEEE 802.11i
Cisco Certified Extensions, all versions through V5
WAPI
|
|
Roaming
|
802.11r Fast Roaming
|
|
Output power (transmitting)
|
802.11b: +16 dBm minimum
802.11g: +14 dBm minimum
802.11a: +14 dBm minimum
802.11n HT20 (2.4 GHz): +14 dBm minimum
802.11n HT40 (2.4 GHz): +12 dBm minimum
802.11n HT20 (5 GHz): +14 dBm minimum
802.11n HT40 (5 GHz): +12 dBm minimum
802.11ac 80 MHz (5 GHz): +12 dBm minimum
|
|
Power consumption
|
Transmit: 2.0 Watts
Receive: 1.6 Watts
Idle mode (PSP): 180 mW (WLAN associated)
Idle mode: 50 mW (WLAN unassociated)
Connect standby: 10 mW (WLAN+BT)
Radio off: 5 mW
|
|
Bluetooth power consumption
|
Peak operating: 330 mW
Receive: 230 mW
USB selective suspend: 17 mW
|
|
Power management
|
The product conforms to the ACPI and PCI Express M.2 bus methods to manage power of the WLAN components.
Supports all 802.11 compliant power-save modes. These include the basic Power Save Polling (PSP) in 802.11 and Automatic Power Save Delivery (APSD) defined in 802.11e.
|
|
Receiver sensitivity for FER <10%
|
802.11b, 1Mbps: -94 dBm maximum
802.11b, 11Mbps: -86 dBm maximum
802.11a/g, 6Mbps: -88 dBm maximum
802.11a/g, 54Mbps: -74 dBm maximum
802.11n, MCS07: -69 dBm maximum
802.11n, MCS15: -66 dBm maximum
802.11ac, 1SS, MCS-0: -86 dBm maximum
802.11ac, 1SS, MCS-9: -61 dBm maximum
802.11ac, 2SS, MCS-0: -83 dBm maximum
802.11ac, 2SS, MCS-9: -58 dBm maximum
|
|
Form factors
|
PCI Express M.2 form factor
|
|
Operating voltage
|
The card will be powered by a 3.3V, ± 9% supply from the host system
|
|
Temperature
|
Operating: -10° to 70° C (14° to 158° F)
Non-operating: -40° to 80° C (-40° to 176° F)
|
|
Humidity
|
Operating: 10% to 90% (non-condensing)
Non-operating: 5% to 95% (non-condensing)
|
|
Altitude
|
Operating: 0 to 3,048 m (10,000 ft)
Non-operating: 0 to 15,240 m (50,000 ft)
|
Intel 3165 1×1 dual band 802.11ac WLAN/Bluetooth combo
|
Specification
|
Description
|
|
Wireless LAN standards
|
IEEE 802.11 ac/a/b/g/n
|
|
Interoperability
|
Wi-Fi certification
WLAN + Bluetooth Combo M.2 Card device shall meet all of the requirements to support Bluetooth 4.1 and backwards compatible with 2.1 with EDR
|
|
Frequency band
|
802.11b/g/n
802.11a/n/ac
|
|
Antenna interface
|
With antennas installed in the system, the antenna peak gain is less than +3dBi in the 2.4 GHz band and less than +4dBi in the 5 GHz band to allow the device to meet regulatory limits
|
|
Data rates
|
802.11b: 1, 2, 5.5, 11 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: card will support rates for NSS=1 and NSS=2 for RX and TX for 20 and 40 MHz channels
802.11ac: card will support rates for NSS=1 and NSS=2 for RX and TX for 80 MHz channels. 433Mbps for 1×1 and 867Mbps for 2×2
|
|
Security
|
IEEE and Wi-Fi compliant 64 / 128 bit WEP encryption for a/b/g mode only
AES-CCMP: 128 bit in hardware
802.1x authentication
WPA, WPA2: 802.1x. WPA-PSK, WPA2-PSK, TKIP, and AES
WPA2 certification
IEEE 802.11i
Cisco Certified Extensions, all versions through V5
WAPI
|
|
Roaming
|
802.11r Fast Roaming
|
|
Output power (transmitting)
|
802.11b: +16 dBm minimum
802.11g: +14 dBm minimum
802.11a: +14 dBm minimum
802.11n HT20 (2.4 GHz): +14 dBm minimum
802.11n HT40 (2.4 GHz): +12 dBm minimum
802.11n HT20 (5 GHz): +14 dBm minimum
802.11n HT40 (5 GHz): +12 dBm minimum
802.11ac 80 MHz (5 GHz): +12 dBm minimum
|
|
Power consumption
|
Transmit: 2.0 Watts
Receive: 1.6 Watts
Idle mode (PSP): 180 mW (WLAN associated)
Idle mode: 50 mW (WLAN unassociated)
Connect standby: 10 mW (WLAN+BT)
Radio off: 5 mW
|
|
Bluetooth power consumption
|
Peak operating: 330 mW
Receive: 230 mW
USB selective suspend: 17 mW
|
|
Power management
|
The product conforms to the ACPI and PCI Express M.2 bus methods to manage power of the WLAN components.
Supports all 802.11 compliant power-save modes. These include the basic Power Save Polling (PSP) in 802.11 and Automatic Power Save Delivery (APSD) defined in 802.11e.
|
|
Receiver sensitivity for FER <10%
|
802.11b, 1Mbps: -94 dBm maximum
802.11b, 11Mbps: -86 dBm maximum
802.11a/g, 6Mbps: -88 dBm maximum
802.11a/g, 54Mbps: -74 dBm maximum
802.11n, MCS07: -69 dBm maximum
802.11n, MCS15: -66 dBm maximum
802.11ac, 1SS, MCS-0: -86 dBm maximum
802.11ac, 1SS, MCS-9: -61 dBm maximum
802.11ac, 2SS, MCS-0: -83 dBm maximum
802.11ac, 2SS, MCS-9: -58 dBm maximum
|
|
Form factors
|
PCI Express M.2 form factor
|
|
Operating voltage
|
The card will be powered by a 3.3V, ± 9% supply from the host system
|
|
Temperature
|
Operating: -10° to 70° C (14° to 158° F)
Non-operating: -40° to 80° C (-40° to 176° F)
|
|
Humidity
|
Operating: 10% to 90% (non-condensing)
Non-operating: 5% to 95% (non-condensing)
|
|
Altitude
|
Operating: 0 to 3,048 m (10,000 ft)
Non-operating: 0 to 15,240 m (50,000 ft)
|
Audio
|
Specification
|
Description
|
|
Type
|
Integrated
|
|
HD stereo codec
|
Realtek 2-channel ALC221 codec
|
|
Audio I/O ports
|
Front microphone-In (150-K ohm Input Impedance)
Rear Line-In/Microphone input (150-K ohm Input Impedance, function is configurable by audio driver)
Rear Line-Out (190 ohms Output Impedance, expects at least a 10-K ohm load) Front Headphone-Out (0.5 Ohm Output Impedance, expects at least a 32 ohm load)
Front Microphone/Headphone jack is re-task able to provide Microphone input, line-in or Headphone output to support connecting two headphones to the front of the system. When configured as a second front headphone output, both front headphone outputs are always driven with the same signal.
All ports are 3.5 mm
|
|
Internal speaker amplifier
|
1.5 W amplifier for the internal speaker only. External speakers must be powered externally. Rear Line-in audio port is re-taskable as either Line-in or Microphone-In.
|
|
Multi-streaming capable
|
Multi-streaming can be enabled in the Realtek control panel to allow independent audio streams to be sent to/from the front and rear jacks.
|
|
Sampling
|
8 kHz – 192 kHz
|
|
Wavetable syntheses
|
Yes – uses OS soft wavetable
|
|
Analog audio
|
Yes
|
|
Number of channels on line-out
|
Stereo (left and right channels)
|
|
Internal speaker
|
Yes
|
|
External speaker jack
|
Yes
|
buy hp elitedesk 800 g2 sff in good condition under warranty in qatar from tfssouq.com. contact : +97477221606
TFS was established in 2018 to become the largest computer parts, gaming pc parts, and other IT related products e-commerce site in Qatar and the GCC. With TFS you can buy online all types of computer parts and peripherals, and get them delivered to your home or office with our express delivery options. TFS is utilizing a safe method of payment (cash on delivery), where you pay after you receive your items.
buy PC under warranty in qatar.
Reviews
There are no reviews yet.